| Tweet |
Custom Search
|
|
|
||
 TM 11-5895-1847-12&P
0150 00
4.
Loosen the mounting screws (4) on each side of the connector shell attached to port B.
6
A
C
B
5
4
2C105-2
5.
Unplug the 25-pin port plug (5), tagged GMDSS-J6/PRNSB, from the B port of the INMARSAT-C data terminal/
INMARSAT-C printer auto switch (6).
6.
Remove nylon cable ties securing J6 external cable to other cables.
INSTALL J6 EXTERNAL CABLE
1.
Plug the J6 cable plug (2), tagged GMDSS-J6/PRNSB, into the port (3) of the 9701 console back.
2.
Tighten the connector shell of the J6 cable plug (2).
3.
Plug the J6 cable port plug (5), tagged GMDSS-J6/PRNSB, into the B port of the INMARSAT-C data terminal/
INMARSAT-C printer auto switch (6).
4.
Tighten the mounting screws (4) on each side of the connector shell attached to port B.
5.
Position auto switch and press down to attach to hook and pile tape.
6.
Install nylon cable ties and secure J6 external cable to other cables.
7.
On back of 9701 console, place switch S1 (1) to ON position (up).
END OF WORK PACKAGE
0150 00 3/4 blank
|
||
|
||
