| Tweet |
Custom Search
|
|
|
||
 TM 11-5895-1847-12&P
0152 00
5.
Align tabs on transmitter (16) with tabs on battery (10) and locking ring (9).
NOTE
Ensure the sealing ring remains in grove.
Correct alignment is required for assembly.
Rotate locking ring and battery if needed to align.
C-spanner tool is provided with replacement battery.
6.
Tighten locking ring clockwise (19) approximately 15 degrees using C-spanner tool (11) to fasten locking ring.
7.
Perform a Search and Rescue Transponder test. (WP 0041 00)
8.
Slide transponder/battery (6) assembly, nose first, back into SART (1).
9.
Slide bottom cap onto telescopic pole.
a.
Ensure the lanyard is secured within the bottom cap.
b.
Align tabs on bottom cap with holes on telescopic pole.
c.
Gently lift out on tabs (3) to clear edge of SART (1).
d.
Slide bottom cap (2) until tabs are secured in holes on SART (1).
e.
Push down on tabs, if necessary.
10. Install Search and Rescue Transponder. (WP 0117 00)
END OF WORK PACKAGE
0152 00 5/6 blank
|
||
|
||
