Tweet |
Custom Search
|
|
|
||
TM 5-1940-277-20
TM 1940-20/2
Section IV. TROUBLESHOOTING (Continued)
MK1 and MK2 w/SABRE or CUMMINS
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
36. HAND BILGE PUMP DOES NOT DISCHARGE WATER (MK1 ONLY).
Step 1. Check hand bilge pump assembly.
a. Repair hand bilge pump assembly (refer to paragraph 3-147).
b. Replace defective hand bilge pump assembly (refer to paragraph 3-146).
37. BOAT VIBRATION FELT WHILE UNDER WAY.
NOTE
Boat must be out of water on cradleor on hardstand to inspect
hydrojet unit anode.
Step 1. Inspect hydrojet unit anode.
a. Replace defective anode (refer to paragraph 3-139).
Step 2. Check transmission oil level.
a. Fill to proper level (refer to LO 5-1940-277-12-1).
Step 3. Inspect drive shaft couplings (refer to paragraph 3-141).
a. Replace defective drive shaft coupling (refer to paragraph 3-141).
Step 4. Check engine mounting bolt torques.
a. Torque to 3035 ft-lbs.
Change 2
2-35
|
||