| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
T M 1940-20/2
1.
Remove cotter pin (1) from wiper blade holding pin (2) located on wiper arm connector (3).
2.
Remove holding pin (2) from connector (3) and wiper blade (4).
Wiper blade will now separate from connector.
3.
INSTALL:
1.
Place new wiper blade (4) into mounting slot of connector (3).
2.
Aline hole of wiper blade (4) with hole in connector (3).
3.
Insert holding pin (2) through connector (3) and blade (4).
4.
Insert new cotter pin (1) into end of holding pin (2).
5.
Spread end of cotter pin (1).
3-16
|
||
|
||
