| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
8.
Using two wrenches remove nuts (9), washers (10) and bolts (11) from hinge plates (12) on hatch cover (13).
Using two wrenches remove nuts (14), washers (15) and bolts (16) from hinge plates (17) on boat frame.
9.
10.
Using two wrenches remove nut (18), washer (19) and bolt (20) securing support brace assembly (6) to boat frame.
11.
Remove support brace assembly (6).
INSTALL:
1. Replace support brace assembly.
Using two wrenches install bolt (20), washer (19) and nut (18) securing support brace assembly (6) to boat frame.
2.
Fit new hinge plate (12) to new hatch cover (13) and aline holes.
3.
Install bolts (11) and washers (10) through hinge plate and hatch cover. Attach washer (10) and nut (9) and tighten
4.
using two wrenches.
Fit new hinge plate (17) to boat frame and aline holes.
5.
Install bolts (16) and washers (15) through hinge plate (17) and boat frame. Attach washer (15) and nut (14) and
6.
tighten using two wrenches.
Fit hatch cover (13) (with hinge plates installed) to boat.
7.
Aline hatch cover (13) with matching hinge plates on boat frame.
8.
Insert hinge pins (2) and install washers (3) and new cotter pins (1).
9.
Flare ends of cotter pins (1).
10.
11.
Close engine hatches.
3-45
|
||
|
||
