| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
2.
Using two wrenches remove 12 nuts (1), sixteen washers (2) and 12 bolts (3) from two hinges (4), hatch cover (5)
and boat frame (6).
3.
Remove hinges (4) and hydrojet hatch cover (5).
4.
Using two wrenches remove nut (7), washer (8) and bolt (9) securing hydrojet hatch cover support brace (10) to boat
frame.
5.
Remove support brace (10).
INSTALL:
1.
Replace support brace (10).
2.
Using two wrenches install washer (8), bolt (9) and nut (7) securing support brace (10) to boat frame.
Position new hydrojet hatch cover (5) on boat alining holes in hatch cover to holes on hinge. Hatch cover must be
3.
in open position.
Using two wrenches install 12 bolts (3), sixteen washers (2) and 12 nuts (1) securing new hinges (4) and hatch cover
4.
(5) to boat frame. Make sure slotted hinge is attached to boat frame.
Close hydrojet hatch cover.
5.
3-47
|
||
|
||
