| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
Place scoop control head (14) in console.
7.
Using screwdriver and 10 mm open end wrench install four screws (12) and nuts (13) securing scoop control
8.
head (14) to console.
Place scoop control housing (9) over scoop control head (14).
9.
10. Using screwdriver and 8 mm open end wrench install four screws (6), washers (8) and nuts (7) securing scoop control
housing (9) to console.
Place scoop control levers in FULL FORWARD position.
11.
Turn crank (3) to nine o'clock
12.
Insert cable (5) into cable fitting and turn crank (3) to take up slack of cable. Several inches of cable will be visible
13.
in spent cable tube (19).
3-74
|
||
|
||
