| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
3-64.1 FUEL SYSTEM BLEEDING MK2 W/CUMMINS
TOOLS: 5/8 inch Open End Wrench
PARTS/MATERIALS: Container, Two Quart Capacity
1.
Open and secure engine hatches (refer to paragraph 3-154).
NOTE
Insure that there is fuel in tank and fuel valves are turned on.
Have container ready to catch fuel.
2.
Placing priming lever (4) on fuel lift pump (3) in the down position.
3.
Using 5/8 inch wrench loosen vent screw (2) on fuel filter head (1).
4.
Pump priming lever (4) until a flow of fuel, free of air bubbles flows from vent screw (2) into
container. Clean up spilled fuel.
5.
Using 5/8 inch wrench tighten vent screw (2) on fuel filter head (1).
6.
Clean up all fuel spillage.
7.
Close engine hatches.
3
~
2
1
4
3-142.3/(3-142.4 Blank)
Change 2
|
||
|
||
