| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
Starboard Engine Bellows (2) Removal:
Using socket loosen two nuts (8) on clamps (9) that secure bellows (10) to connector piping (11) and exhaust
4.
pipe (12).
Remove and discard bellows.
5.
Retain bellows clamp for installation of replacement.
6.
INSTALL:
Port Engine Bellows (1) Removal:
Place bellows clamps (4) on replacement bellows (5) and aline so that clamp nuts will face toward engine compart-
1.
ment when bellows is installed.
2.
Install bellows (5) between transmission oil cooler (7) and exhaust pipe (6) and install buoyancy block.
Tighten clamps using socket.
3.
Starboard Engine Block (2)Installation:
Install bellows clamps (9) on replacement bellows (10) and aline so that clamp nuts (8) will face toward engine
4.
compartment when bellows is installed.
Install bellows (10) between connector piping (11) and exhaust pipe (12).
5.
Tighten clamps using socket.
6.
7.
Close engine hatches.
3-144
|
||
|
||
