| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
2.
Remove oil filter (refer to paragraph 3-76).
3.
Using 9/16 inch wrench remove turbo oil supply line (1) from adapter (2).
4.
Using 1/2 inch socket remove fourteen screws (3), lubricating oil cooler housing (4), bypass valve (6),
gasket (7), oil cooler core (8), and gasket (9) from engine (5).
5.
Using 3/4 inch wrench remove oil filter adapter (10) from lubricating oil cooler housing (4).
6.
Using 5/8 inch wrench remove plug (15) from lubricating oil cooler housing (4).
7.
Using 5/8 inch wrench remove adapter (2) from lubricating oil cooler housing (4).
8.
Using 9/16 inch wrench remove plug (14), O-ring (13), spring (12), and pressure regulator
plunger (11) from lubricating oil cooler housing (4).
INSTALL:
1.
Apply thin coat of sealing compound on adapter threads (2) and plug threads (15).
2.
Using 9/16 inch wrench install pressure regulator plunger (11), spring (12), new O-ring (13), and
plug (14) on lubricating oil cooler housing (4).
3.
Using 5/8 inch wrench install adapter (2) on lubricating oil cooler housing (4).
4.
Using 5/8 inch wrench install plug (15) on lubricating oil cooler housing (4).
5.
Using 3/4 inch wrench install oil filter adapter (10) on lubricating oil cooler housing (4).
6.
Using 1/2 inch socket install fourteen screws (3) securing gasket (7) lubricating oil cooler core (8),
gasket (9), bypass valve (6), and lubricating oil cooler housing (4) on engine (5).
7.
Using 9/16 inch wrench install turbo oil supply line (1) on adapter (2).
8.
Install oil filter (refer to paragraph 3-76).
9.
Close engine hatches.
3-162.1
Change 2
|
||
|
||
