| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
INSTALL:
Install copper washers (18) on injector (16) and install injector(s) (16).
1.
Using 1/2 inch socket extension and torque wrench install bolt(s) (15) securing injector(s) (16) to cylinder head.
2.
Torque to 14 to 16 ft/lb.
Holding inlet adapter nut(s) (10), unscrew injector oil seal nut(s) (9) to the extreme end of the threads.
3.
Fit oil seal with retainer (17) onto inlet adapter nut (10).
4.
Position injector pipe(s) (12) to pump (13).
5.
3-270
|
||
|
||
