| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
8.
Using screwdriver remove four screws (11) and washers (12) from bracket (9) and pump assembly (8).
9.
Remove and clean screen (13).
INSTALL:
1.
Fit pump assembly (8) to screen (13) and bracket (9). Insure screw holes are alined.
2.
Using screwdriver reinstall four screws (11) securing replacement bilge pump to bracket (9).
Position replacement bilge pump in sump location.
3.
4.
Aline holes of pump base with holes in mounting bracket on boat.
Secure pump with two washers (6), mounting bolts (7) and nuts (5).
5.
6.
Tighten two nuts (5) using wrench.
7.
Connect bilge discharge hose (2) to pump and tighten hose clamp (3) with screwdriver.
8.
Connect sending unit lead (4).
9.
Connect and screw on motor electrical plug (1).
10.
Close hydrojet hatch covers.
11.
Close engine hatch covers.
3-303
|
||
|
||
