| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20P
TM 1940-20P/4
(2) FIG. Column. This column lists the number of the figure where the item is identified/located. The figures are in
numerical order in Section II and Section III.
(3) ITEM Column. The item number identifies the item associated with the figure listed in the adjacent FIG.
column. This item is also identified by the NSN listed on the same line.
b. PART NUMBER INDEX. Part numbers in this index are listed by part number in ascending alphanumeric
sequence (i e., vertical arrangement of letter and number combination which places the first letter or digit of each
group in order A through Z, followed by the numbers 0 through 9, and each following letter or digit in like order).
(1) CAGEC Column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code used to
identify the manufacturer, distributor, or Government agency/activity that supplies the item.
(2) PART NUMBER Column. Indicates the primary number used by the manufacturer (individual, firm, corporation,
or Government activity), which controls the design and characteristics of the item by means of its engineering drawings,
specifications, standards, and inspection requirements to identify an item or range of items.
(3) STOCK NUMBER Column. This column lists the NSN for the associated part number and manufacturer
identified in the PART NUMBER and CAGEC columns to the left.
(4) FIG. Column. This column lists the number of the figure where the item is identified/located in Section II and
(5) ITEM Column. The item number is that number assigned to the item as it appears in the figure referenced in
adjacent figure number column.
c. FIGURE AND ITEM NUMBER INDEX.
(1) FIG. Column. This column lists the number of the figure where the item is identified/located in Section II and
(2) ITEM Column. The item number is that number assigned to the item as it appears in the figure referenced in the
adjacent figure number column.
(3) STOCK NUMBER Column. This column lists the NSN for the item.
(4) CAGEC Column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code used to
identify the manufacturer, distributor, or Government agency/activity that supplies the item.
(5) PART NUMBER Column. Indicates the primary number used by the manufacturer (individual, firm, corporation,
or Government activity), which controls the design and characteristics of the item by means of its engineering drawings,
specifications, standards, and inspection requirements to identify an item or range of items.
5. SPECIAL INFORMATION.
a. USABLE ON CODE. The usable on code appears in the lower left comer of the Description Column heading.
Usable on codes are shown as "UOC:.." in the Description Column (justified left) on the last line of the applicable item
description/nomenclature. Uncoded items are applicable to all models. Identification of the usable on codes used in this
RPSTL are:
Code
Used On
DLF
Model USCSBMK-1
DUV
Model USCSBMK-2
b. FARRICATION INSTRUCTIONS. Bulk materials required to manufacture items are listed in the Bulk Material
Functional Group of this RPSTL. Part numbers for bulk materials are also referenced in the description column of the
line entry for the item to be manufactured/fabricated. Detailed fabrication instructions for items source coded to be
manufactured or fabricated are found in TM 5-1940-277-34.
c. INDEX NUMBERS. Items which have the word BULK in the figure column will have an index number shown in the
item number column. This index number is a cross-reference between the National Stock Number/Part Number Index
and the bulk material list in Section II.
5
|
||
|
||
