| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
Table 3-1. Operator Troubleshooting - Continued
Malfunction
Test or Inspection
Corrective Action
STEP 2. Check for cracked, broken battery.
If battery is cracked or broken, replace battery.
If battery is not defective, proceed to Step 3.
STEP 3. Check that fuel tank has sufficient fuel to cover the pick-up tube.
If fuel level is low, fill tank.
If fuel level is not low, proceed to Step 4.
STEP 4. Check for loose, restricted, or damaged fuel strainer or filter.
If fuel strainer or filter is loose, tighten strainer or filter.
If fuel strainer or filter is restricted or damaged, replace strainer or filter.
If fuel strainer or filter is not damaged or loose, notify Unit Maintenance.
4.
Uneven Running or Frequent Stalling.
Check for sufficient fuel supply.
If fuel supply is low, fill tank.
If fuel supply is adequate, notify Unit Maintenance.
5.
Lack of Power.
STEP 1. Check for clogged or dirty air cleaner element.
If air cleaner is clogged or dirty, replace air cleaner.
If air cleaner is not clogged or dirty, proceed to Step 2.
STEP 2. Check that fuel tank has sufficient fuel to cover the pick-up tube.
If fuel level is low, fill tank.
If fuel level is not low, proceed to Step 3.
STEP 3. Check for loose, restricted, or damaged fuel strainer or filter.
If fuel strainer or filter is loose, tighten strainer or filter.
If fuel strainer or filter is restricted or damaged, replace strainer or filter.
If fuel strainer or filter is not damaged or loose, notify Unit Maintenance.
3-3
|
||
|
||
