REPLACEMENT - TM-5-2010-205-140083

Custom Search

Figure 4-17. Fuel Injection Lines Assembly

TM-5-2010-205-14 Propelling Unit Outboard NSN 2010-01-251-2227 Manual

REPLACE MECHANICAL COVER ASSEMBLY

TM 5-2010-205-14

6. Remove Bracket (3).

CAUTION

Thoroughly clean around each fuel line connection before fuel lines are disconnected.

NOTE

Put tags on fuel lines to identify their location.

7. Loosen connections (8) typical.

8. Remove line assembly (9).

9. Loosen connections (10) typical.

10. Remove line assembly (11).

NOTE

All fuel injection line nuts (8) and (10) will be tightened to a torque of 30 lb-ft.

11. Assemble line (11) onto cylinders and fuel injection pump.

12. Tighten nuts (10) typical.

13. Assemble line (9) onto cylinders and fuel injection pump.

14. Tighten nuts (8) typical.

15. Install bracket (3).

16. Install and tighten bolt (2).

17. Install hose (6).

NOTE

The hose clamp connection (7) will be tightened to a torque of 20 lb-ft.

18. Install hose clamp (7) and tighten.

19. Install vent line (5).

20. Tighten fittings (1) and (4).

4-44