REPLACEMENT - TM-5-2010-205-140091

Custom Search

REPAIR/REPLACE PCV LINES ASSEMBLY

TM-5-2010-205-14 Propelling Unit Outboard NSN 2010-01-251-2227 Manual

Figure 4-21. PCV lines Assembly

TM 5-2010-205-14

NOTE

To disassemble and reassemble PCV valve (1), continue with Step 4 through 24. Go to

Step 25 for disassembly and reassembly of all other parts.

4. Loosen and remove screws (2).

5. Remove cover (3) and spring (4).

6. Remove sleeve (9), retainer (8), and diaphragm (7)'as a unit.

7. Remove sleeve (6).

8. Remove gasket (5).

9. Remove nut (12) and washer (13).

10. Remove spacer (11).

11. Remove retainer (8).

12. Separate piston (10) and diaphragm (7) from sleeve (9).

13. Put gasket sealing compound on both sides of new gasket (5).

14. Install sleeve (6) in housing (1).

15. Put piston (10) in position next to diaphragm (7).

16. Install retainer (8) in diaphragm (7).

17. Put screw (19) through sleeve (9), retainer (8), piston (10), and diaphragm (7).

18. Install spacer (11), washer (13), and nut (12) on the screw (19).

4-52