Figure 4-30. Water Pump Assembly

Custom Search

Figure 4-29. Water Pump Assembly

TM-5-2010-205-14 Propelling Unit Outboard NSN 2010-01-251-2227 Manual

REPLACEMENT

TM 5-2010-205-14

11. Remove ring (12).

12. Remove shaft (13) and seal (14) from impeller (15).

13. Install seal assembly (14) and shaft (13) onto impeller (15).

14. Install new seal (14) and shaft (13) in housing (9).

15. Install ring (12) in housing.

16. Install spacer (11).

17. Install bearing (10).

NOTE

The shaft (13) to bearing (10) clearance should be .0007 inch loose to .0003 inch tight.

18. Install pulley (6).

19. Tighten bolt (7) to 55 lb-ft.

Figure 4-30. Water Pump Assembly

4-68