| Tweet |
Custom Search
|
|
|
||
 TIM 5-2010-205-14
REPLACEMENT
NOTE
Whenever lines are disconnected, first clean the point of disconnection and the adjacent area.
NOTE
Be sure ail passages are clean before reinstalling.
REMOVE/REPLACE
1. Loosen and remove basket strainer (8).
2. Remove pipe section (7).
3. Remove elbow (6).
4. Loosen nuts and remove U-bolt (5).
5. Remove pipe section (4).
6. Remove elbow (3).
7. Remove pipe section (2).
8. Remove elbow (1).
9. Remove close coupling (24).
10. Remove nuts (9), washers (10), and bolts (12).
11. Remove screw (13).
12. Remove washer (14).
13. Remove valve stem (15).
14. Install valve stem (15).
15. Install washer (14).
16. Install and tighten screw (13).
17. Install bolts (12), washers (10), and nuts (9).
18. Install close coupling (24).
19. Install elbow (1).
20. Install pipe section (2).
21. Install elbow (3).
4-103
|
||
|
||
