| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
NOTE
The inside diameter of bearing (6) must be 2.804 (+/-.002).
NOTE
If a replacement bearing (6) is needed, mark timing gear
cover as to the location of the joint in the bearing.
9.
Remove bearing (6).
Figure 5-5. Oil Pump Assembly
10. Install bearing (6).
11. Install outer rotor (7).
12. Install inner rotor (8).
NOTE
Measure clearance between the rotor.
Clearance must be .002 to .006 inch.
5-13
|
||
|
||
