REPLACEMENT - TM-5-2010-205-140189

Custom Search

Figure 5-7 (1 of 2) Manifold Assembly

TM-5-2010-205-14 Propelling Unit Outboard NSN 2010-01-251-2227 Manual

Figure 5-7 (2 of 2). Manifold Assembly

TM 5-2010-205-14

11. Install rear gaskets (12) and manifold assembly.

NOTE

Tighten the exhaust manifold bolts in letter sequence as follows:

Make sure bolts (A) are tightened to a torque of 32 +/-5 lb.ft.

Tighten bolts (B) through (D) to a torque of 1 lb.ft. finger tight.

Tighten bolts (B) through (D) to a torque of 10 +/-5 lb.ft.

Tighten bolts (B) and (C) to a torque of 32 +/-5 lb.ft.

Tighten bolts (D) to a torque of 75 +/-10 lb.ft.

12. Install bolts (9).

13. Install vent line.

14. Install gasket (7).

15. Install elbow (4).

16. Install bolts (6).

17. Install gasket (5).

18. Install elbow (4) and manifold assembly (5).

19. Install bolts (2) and bolts (3).

20. Connect hose (1).

5-20