| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
NOTE
Immediately after disconnecting any hose assembly, tag or mark connection to insure proper reassembly.
NOTE
As soon as a disconnection is made, tape or plug open connections.
NOTE
Be sure parts reinstalled are clean prior to reassembly.
NOTE
Keep all new parts in their containers until ready to use.
NOTE
Hoses should be stored in a dark, dry atmosphere away from electrical equipment. The
temperature should not exceed 90 degrees.
1. Loosen and remove connections.
2. Remove hose assembly.
NOTE
It is recommended to remove and replace one (1) hose assembly completely before removing a second.
3. Install hose assembly.
4. Tighten hose end connections.
CAUTION
Removal and installation of O-ring fittings requires care to prevent damage to the O-ring or leaks may result.
5. Disconnect assembly (1).
5-67
|
||
|
||
