| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
REPLACEMENT
13. Loosen and remove bolts (23) and washers (22).
14. Loosen and remove screws (26) and washers (25).
15. Remove protective cover (27) and bearing (28).
16. Remove steering motor assembly (para 4-49).
17. Remove pinion (29).
18. Remove drain plug (30).
19. Remove swivels (31) and (32).
20. Loosen and remove bolts (33) and washers (34) to remove plate (35).
21. Loosen and remove bolts (36) and (43) and washers (37) and (42) to remove tubing assemblies (41).
22. Remove hoses (44) and (46).
23. Pull swivel stator (45) from rotor (38).
24. Remove four seals (40) and two bearings (39).
25. Loosen and remove bolts (53) and washers (52) to remove retainer plate (51).
26. Loosen and remove bolts (50) and washers (49).
27. Adapter (48) and gear (47) can now be removed.
28. Install gear (47) and adapter (48).
29. Install bolts (50) and washers (49).
30. Install retainer plate (51).
31. Install washers (52) and bolts (53).
32. Install bearings (39) and seals (40).
33. Install rotor (38) into stator (45).
34. Install hoses (44) and (46).
35. Install tubing assemblies (41).
36. Install washers (37) and (42) and bolts (36) and (43).
5-72
|
||
|
||
