| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
INSTALL CAMSHAFT GEAR AND CAMSHAFT
CAUTION
Be sure gear is completely seated against shoulder of camshaft.
3.
Install automatic timing advance (1) on camshaft gear (6) aligning holes in weights with dowels in camshaft gear.
4. Install washer (3) aligning pin (5) in washer with hole (6) in camshaft.
5. Install screw (4) and tighten to 70 lb.-ft.
NOTE
After screw is staked, gear and weight assembly requires .001 to .037
inch end clearance.
6. Stake screw in two places.
CAUTION
Stake screw (4) carefully.
7. Put lubricating oil on camshaft lobes and journals.
8. Install camshaft and gears as a unit.
NOTE
Make sure timing marks on crankshaft gear and camshaft gear are in
alignment. (view AA)
9. Install thrust pin and tighten to 35 lb.-ft. (Fig. 6-6.)
10. Install tachometer drive adapter and tighten to 110 ft.-lb. (Fig. 6-6.)
6-24
|
||
|
||
