Source Code.

Custom Search

SECTION I. INTRODUCTION

TM-5-2010-205-24P Propelling Unit Outboard 165HP (Model TMOT-OD-250A) NSN 2010-01-251-2227 Manual

Maintenance Code.

TM 5-2010-205-24P

*Complete Repair: Maintenance capacity, capability, and authority to perform all corrective maintenance tasks

of the "Repair" function in a use/user environment in order to restore serviceability to a failed item.

(1)

Source Code. The source code tells you how to get an item needed for maintenance, repair,

or overhaul of an end item/equipment. Explanations of source codes follows:

Code

Explanation

}

Stocked items; use the applicable NSN to request/requisition items with these source

codes. They are authorized to the category indicated by the code entered in the 3rd

PC**

position of the SMR code.

**NOTE: Items coded PC are subject to deterioration.

}

Items with these codes are not to be requested/requisitioned individually. They are part

of a kit which is authorized to the maintenance category indicated in the 3rd position of

the SMR code. The complete kit must be requisitioned and applied.

}

MO - (Made at org AVUM

Items with these codes are not to be requested/requisitioned

Level)

individually. They must be made from bulk material which is

MF - (Made at DS/AVUM

identified by the part number in the DESCRIPTION and

Level)

USABLE ON CODE (UOC) column and listed in the Bulk

MN - (Made at GS Level)

Material group of the repair parts list in this RPSTL. If the

ML - (Made at Specialized

item is authorized to you by the 3rd position code of the SMR

Repair Activity (SRA))

code, but the source code indicates it is made at a higher level,

MD - (Made at Depot)

order the item from the higher level of maintenance.

AO - (Assembled by org/AVUM

Items with these codes are not to be requested/requisitioned

}

Level)

individually. The parts that make up the assembled item

AF - (Assembled by DS/AVIM

must be requisitioned or fabricated and assembled at

Level

the level of maintenance indicated by the source code.

AN - (Assembled by GS

If the 3rd position code of the SMR code authorizes you

Category)

to replace the item, but the source code indicates the items

AL - (Assembled by SRA)

are assembled at a higher level, order the item from the

AD - (Assembled by Depot)

higher level of maintenance.

XA - Do not requisition "XA" coded item. Order its next higher assembly. (Also, refer to the NOTE

below.)

XB - If an "XB" item is not available from salvage, order it using the CAGEC and part number given.

XC - Installation drawing, diagram, instruction sheet, field service drawing, that is identified by

manufacturer's part number.

XD - Item is not stocked. Order an "XD" coded item through normal supply channels using the

CAGEC and part number given if no NSN is available.