| Tweet |
Custom Search
|
|
|
|
||
|
||
 TM 55-1905-217-12
INTERVAL
Equipment will be reported
ITEM
B
D
A
M
Q
B/A Item to be inspected
Procedure
not ready (red) if:
Ramp Assembly`
Ensure ramp will operate through
Ramp is inoperative
all phases (up and down). Inspect
ative/defective No
oil
and replace pulleys, bushings and
evidenced in sight glass
cable if defective. Replace ramp
on reservoir in engine
assembly gaskets if defective
room. System does not
Replace excess covers if defec-
respond smoothly to all
tive Check for cracked
demands.
welds/visual structural damage.
Ensure ramp locking dogs are
functional.
11
Void covers
Inspect for proper installation,
Void covers missing/are
missing/defective fasteners, also
not installed.
check gasket for proper seal.
12
Bitts and chocks
Inspect for damage and cracked
base welds.
13
Mast and yardar
Inspect for mechanical damage
If mast is damaged to ex-
and ensure lights are functional
tent that apportenances
are not properly sup-
ported.
14
Engine room and
Ensure hatches can be secured at
lazaratte hatch
night to prevent tampering and
covers
damage to craft, pilferage of on
board spare/BIIL items. Check
bilges for presence of oil or ex-
cessive water.
15
Navigational lights
Visually inspect to ensure that all
Lights are inoperative.
lights operate properly with the
Circuits are defective.
switch in the on position. Inspect
all lenses for damage and
cleanliness. Check vessels horn
for proper operation.
16
Magnetic
Check heading on two known
Magnetic compass is in-
Compass
courses Check deviation
operative. Compasswill
whenever metal structural
not swing freely in gim-
changes are made to vessel; or
bal.
when electronic equipment is add-
ed/removed. Ensure deviation
card is up to date and annual
deviation is posted. Ensure devia-
tion card is located in immediate
vicinity of compass. Remove any
bubbles in compass bowl. Refer
to TB 55-6605-262-24 and Mfg.
manual for additional detailed in-
formation.
Change 2 3-6.2
|
||
|
||
