| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-217-34
NOTE
Before removing the idler gear check the idler gear, hub and bearing assembly for any
perceptible wobble or shake when pressure is applied; by firmly grasping the rim of the
gear with both hands and rocking h relation to the bearing. The bearing must be replaced
if the gear wobbles or shakes. If the gear assembly is satisfactory, it is only necessary to
check the pre-load before reinstallation.
(2) Remove the idler gear hole spacer (12, fig. 3-58), in the same manner if the engine is being completely
reconditioned.
3-79
|
||
|
||
