| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-217-34
b. Disassembly. Remove drain plug (1), elbow (2), flexible hose (3), elbow (4), bolt (5), lockwasher (6),
and remove the oil pan sump (7) and gasket (8), from the oil pan.
c. Cleaning and Inspection.
(1) Clean all metal parts of the oil pan assembly with cleaning solvent (FED. SPEC. PD-680) and dry
thoroughly.
(2) Inspect for damage, cracks, corrosion. and defective or missing hardware.
d. Repair.
(1) Remove rust and corrosion, straighten dents, and weld minor cracks and breaks.
(2) Replace gaskets and any defective parts as required.
(3) Replace an oil pan assembly that is damaged beyond repair.
e. Reassembly. Reassemble the oil pan assembly in reverse order of disassembly (b above).
f. Installation. Install the oil pan in reverse order of removal (a above).
3-19. Oil Pump
a. Removal.
(1) Remove oil pan (para 3-18).
(2) Remove the bolts and lockwashers that mount the oil pump, regulator body, outlet tube, and inlet
tube support, and remove oil pump assembly from the block and bearing caps. (fig. 370).
3-95
|
||
|
||
