Tweet |
Custom Search
|
|
|
||
TM 55-1905-217-34
Figure 4-10. Middle bearing assembly-exploded view.
(6) Remove lubricating wick (2).
(7) Remove pipe plug (4).
(8) Press middle sleeve bearing (5) and oil seal (6) from middle bearing bracket (3). Use a suitable rod
and arbor press for this purpose.
NOTE
Do not remove bearing and seal unless replacement is necessary.
e. Disassembly of Commutator End Bearing Assembly.
(1) Remove eight brush lead attaching screws (14, fig. 4-11), lock washers (15) and brush assemblies
(13).
4-17
|
||