| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-1
Table 2-1. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - continued
Location
Item
Item to Check/
Not Mission
No.
Interval
Service
Procedure
Capable :
110
MONTHLY
Anchor Winch
CHANGE ENGINE OIL. Pump oil into a
Low oil level.
Compartment
suitable container through dipstick hole (4).
NOTE
Do not drain oil into bilges. Use
oil separation/recovery system
to collect used oil.
111
MONTHLY
Anchor Winch
OIL FILTER. Remove pipe plug (5) and
Filter obstructed.
Compartment
drain oil into a suitable container.
NOTE
Do not drain oil into bilges. Use
oil separation system to collect
used oil.
Loosen oil filter stud (6) and oil filter shell (7).
Filter obstructed.
Remove gasket (8) and filter (9). Install a
new filter (9) and gasket (8) into oil filer shell
(7). Tighten stud (6). Replace drain plug (5).
NOTE
Also, do oil filter by-pass. It is
located on the left side. Refer
to Item 94.
2-158 Change 4
|
||
|
||
