| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-10
MARINE GEAR - MAINTENANCE INSTRUCTIONS (Continued)
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL - REASSEMBLY (Cont)
q. Clutch
1. Carefully install in
piston
clutch cylinder ( 182).
(183)
2. Place clutch piston
and cylinder against
clutch spider (172).
3. Use three full
Hold cylinder
threaded 3/8-16 X 1
to spider
inch screws.
against tension
of springs.
r.
Roll
Install 6 pins.
Use tool T6991.
pins
(189)
s.
Lock
1. Install.
Use new lock
plates
plates.
(180)
and
2. Tighten nuts to 38
nuts
lb-ft (51.5 Nm)
(181)
3. Bend ends of lock
plates against the
flats of the nuts.
4. The center of each
lock plate must cover
a roll pin (189).
5. Remove three screws
installed in step 16q.
5-100
|
||
|
||
