| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-10
5-5. MARINE GEAR MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL - REASSEMBLY (Cont)
r.
Roll
Install 6 pins.
Use tool T6991.
pins
(157)
s.
Lock
1. Install.
Use new lock
plates
plates.
(147)
and
2. Tighten nuts to 38
nuts
lb-ft (51.5 Nm)
(148)
3. Bend ends of lock
plates against the
flats of the nuts.
4. The center of each
lock plate must cover
a roll pin (157).
5. Remove three screws
installed in step 17q.
t.
Outer
1. Install.
Use tool T9802.
race of
forward
2. Carefully align the
pinion
pin hole in the outer
roller
race with the pin
bearing
hole in the housing.
(167)
5-110
|
||
|
||
