| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-10
5-5. MARINE GEAR MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL IN CRAFT (Cont)
2. Place the clutch cylinder (149) with
piston, in position against the clutch
spider (152). Use three 3/8-16 NC X 1
fully-threaded machine screws to hold
the cylinder to the spider against the
tension of the springs. Install six
lock plates (147) and twelve 3/8-24 hex
nuts (148) on the studs on the clutch
spider. The center of each lock plate
must cover a roll pin. Tighten the hex
nuts to 38 lb-ft (51.5 Nm) torque, and
lock in place by bending the lock
plates (147). Remove the three hold-
down machine screws.
5-157
|
||
|
||
