| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-10
5-5. MARINE GEAR MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL IN CRAFT (Cont)
retainer shims (123) that were removed,
against the main housing and secure
the retainer to the housing with seven
1/2-13 X 1-1/2 hex-head cap screws
(121). Tighten the cap screws to 85
lb-ft (115.2 Nm) torque.
2. Carefully tap the propeller flange on
the counter shaft. Do not damage the
oil seals! Install a new ring gasket
(119) in the propeller flange. Secure
the propeller flange to the counter
shaft (120) with the propeller flange
shim (118), the retainer washer, and
three 5/8-18 X 1-1/2 hex-head cap
screws (116). Tighten the cap screws
to 175 lb-ft (237.3 Nm) torque.
3. Slide the propeller shaft and companion
flange forward against the propeller
flange. Align the scribed marks on the
propeller flange and companion flange.
Secure the flanges together with the
bolts previously removed.
4. After the installation has been com-
pleted, fill the marine gear sump with
oil.
5-163
|
||
|
||
