| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-10
5-7. VARIABLE SPEED MECHANICAL GOVERNOR-MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL-DISASSEMBLY (Cont)
7. Remove the shaft
(81), operating
lever (83), bearing
(84) and spacer (85)
as an assembly.
l.
Lower
Remove from housing.
bearing
(86)
m. Shaft
1. Place a short 9/16
(81),
inside diameter
operating
sleeve over the end
lever (83),
of the operating
bearing
shaft and rest it
(84) and
against the inner
spacer
race of the bearing.
(85) as an
assembly
2. Place the sleeve and
assembly on a large
washer or plate,
with a 5/8 inch hole,
on the bed of an
arbor press.
3. Place a small brass
rod on the end of
the shaft and under
the ram of the
press.
4. Press the shaft
Catch the shaft
(81) out of the
to prevent it
lever (83) and
from falling and
bearing (84).
being damaged.
NOTE
Be sure that the bearing inner race is resting on the sleeve or
the bearing may be damaged.
5-190
|
||
|
||
