| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-10
5-7. VARIABLE SPEED MECHANICAL GOVERNOR - MAINTENANCE INSTRUCTIONS
(Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL-REASSEMBLY (Cont.)
2. Place a sleeve with a
1/2" inside diameter
on top of the bearing
inner race.
3. Bring the ram of the
press down on the
sleeve and press the
bearing into the
housing and against
the shoulder on the
shaft.
i.
Lockwasher
Place the lock washer on
(51)
the end of the weight
carrier shaft with the
tang on the inner diameter
of the washer in the notch
in the end of the shaft.
j.
Flatwasher
1. Place the flat washer
(53) and
on the bearing retainer
screw (52)
screw and thread the
screw into the shaft.
2. Clamp the splined end
of the weight carrier
shaft in the soft
jaws of a bench vise
and tighten the bearing
retainer bolt to 15-19
lb-ft (20.3-25.7 N.m)
torque. Bend the tang
on the lock washer
against the head of
the bolt.
k.
Gasket
1. Place gasket in the
(57) and
housing and against
plug (50)
the bearing.
5-208
|
||
|
||
