| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-10
5-7. VARIABLE SPEED MECHANICAL GOVERNOR - MAINTENANCE INSTRUCTIONS
(Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL-REASSEMBLY (Cont.)
2. Remove the bearing
pilot rod from the in-
staller body and place
the installer body over
the end of the shaft
and against the bearing.
3. Support the spring
housing, bearings and
installer on a short
sleeve on the bed of
an arbor press as
shown, then press the
bearing in the housing
until the shoulder on
the installer contacts
the housing.
g. Seal (39)
Install
Use new seal.
h. Cup plug
1. Apply a thin coat of
(37)
sealing compound to
the outside diameter
of the cup plug.
5-213
|
||
|
||
