| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-10
5-7. VARIABLE SPEED MECHANICAL GOVERNOR - MAINTENANCE INSTRUCTIONS
(Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL-REASSEMBLY (Cont.)
11. Variable
a. Governor
Clamp in vise.
Use soft jaws.
speed
housing
plunger
(18)
b. Plunger
1. Start straight into
guide
boss inside housing.
(30)
2. Tap in place with a
small brass rod and
hammer.
c.
Variable
1. Lubricate the small
speed
end of the variable
spring
speed spring plunger
plunger
with engine oil .
(29)
2. Insert the plunger
in the plunger guide
inside the governor
housing .
d. Spring
Install in counterbore
retainer
of housing.
stop (27)
e. Spring
1. Lubricate outside
retainer
diameter with engine
(23)
oil.
2. Insert the spring
retainer, solid end
first, into the spring
housing (21) and
against the spring
lever.
f.
Shims (24
Place the same amount of
and 25)
shims,that were removed,
in the spring retainer
(23). Use thin shims
first.
5-216
|
||
|
||
