| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-10
5-8. BLOWER - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL - ASSEMBLY (Cont)
3. Install an oil seal pilot
J6270-5 over the opposite
end of each rotor shaft.
4. Insert the rotors straight
into the housing and
through the front blower
end plate.
5. Remove the oil seal
pilots from the rotor
shafts.
g. Blower
1. Install an oil seal pilot
rear end
J6270-5 over the serrated
plate
end of each rotor shaft.
(57)
2. Check the dowel pins.
The dowel pins must pro-
ject .270" from the flat
inner face of the rear
end plate to assure
proper alignment of end
plate with the housing.
3. With the top of the end
plate identified as in
Step 8 a and its flat
finished face towards
the blower housing,
slide the end plate
straight over the oil
seal pilots and start
5-242
|
||
|
||
