| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-10
5-8. BLOWER - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL - ASSEMBLY (Cont)
3. Place the alignment clamp
adapter J21834-1, in the
coupling cam. Then, install
the
alignment
clamp
J21834-2 and tighten it
only enough to prevent any
misalignment during the
assembly of the coupling
to the gear.
CAUTION
Insert a rag between the rotor gears to keep them from turning.
4. Tighten two bolts that are
opposite to one another to
20-25 lb-ft (27.1 - 33.9
Nm) torque and then
remove the alignment
clamp and tighten the
remaining bolts to the
same torque. The cam
spline runout should not
exceed 020" total indicator
reading.
5-258
|
||
|
||
