| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-10
5-9. FUEL INJECTOR-MAINTENANCE INSTRUCTIONS (Continued)
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL-ASSEMBLY (Cont)
5. Injector
filters
NOTE
Use an extremely clean bench to work on and to place
the parts when assembling an injector. Also be sure
all of the injector parts, both new and used, are
clean.
a. Filters
1. Insert a new filter,
Use a new filter.
(3)
dimple end down,
slotted end up, in
each of the fuel
cavities in the top of
the injector body (8).
b. Gaskets
1. Install gasket on
Use new gaskets.
(2), and
each filter cap.
filter
caps (1)
2. Lubricate cap threads
and install.
3. Tighten caps to 65-75
Use 9/16 inch
lb-ft (88.1 - 101.7
deep socket.
Nm) torque.
WEARING
Wear protective eye goggles when using compressed air.
c.
Filters
1. Purge the filters after
installation by
directing compressed
air or fuel through
the filter caps.
2. Install clean shipping
caps on the filter
caps to prevent dirt
from entering the
injector.
5-278
|
||
|
||
