| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-10
5-9. FUEL INJECTOR - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL - ASSEMBLY ( Cont)|
b. Stop pin
1. Place stop pin on in-
(5) and
jector body so that the
follower
follower spring rests
(4)
on the narrow flange
of the stop pin.
2. Align the slot in the
follower with the stop
pin hole in the injec-
tor body.
3. Align the flat side of
the plunger with the
slot in the follower.
4. Insert the free end of
the plunger in the
injector body.
5. Press down on the
follower and at the
same time press the
stop pin into position.
When in place, the
spring will hold the
stop pin in position.
5-284
|
||
|
||
