| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-10
5-19.1. CAMSHAFT ASSEMBLY AND GEAR TRAIN - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (Cont)
d. Camshaft
Perform steps a thru c.
(18)
e. Gasket
1. Install.
(24),
bushing
2. Lubricate bearing.
Use new gasket.
(23),
front end
3. Slide bearing on
bearing
left bank camshaft
(17)
with the bolting
flange towards the
outer end of the
shaft.
f.
Bushing
Install.
(22), and
left bank
oil seal
(21)
g. Bolts
1. Install.
(15), and
2. Tighten bolts to 35-40
(16)
lb-ft (47.5 - 54.2 Nm)
h. Front end
Install on right bank.
Perform steps
bearing
e thru g above.
(17)
NOTE
There is no oil seal (21) on the right bank.
i.
Spacer (8)
1. Lubricate.
Spacer has
polished out-
side diameter.
2. Slide on left bank.
3. Install another
spacer on right bank.
j.
Keys (7)
Install.
5-340
|
||
|
||
