| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-10
5-34. GOVERNOR-MAINTENANCE INSTRUCTIONS (Continued)
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY
4. Hydraulic
a. Bearing
1. Support bearing on
governor
(8), and
arbor press.
drive
shaft (7)
2. Press shaft into
bearing and against
shoulder on shaft.
b. Bearing
1. Start bearing on
(11),
shaft.
sleeve
(10), and
2. Support sleeve on
shaft (12)
bed of arbor press.
3. Using a brass bar
between ram and
gear, press shaft
into bearing and
sleeve.
c.
Driven
1. Lower into housing
shaft
(13).
assembly
(9)
2. Bearing will rest
on shoulder in
housing.
d. Nuts (4),
Start nuts onto set-
and set-
screws.
screw (5)
e. Setscrews
1. Thread screw into
(5), and
housing until it
gaskets (6)
bottoms on outer
race of bearing.
2. Tighten nut (4).
f.
Horizon-
1. Install with bearing
tal drive
resting in counter
shaft (7),
bore provided.
shaft and
bearing
2. Teeth will mesh with
(8),
teeth in driven gear
assembly (9).
5-548
|
||
|
||
