| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-10
5-35. BLOWER - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL - ASSEMBLY (Cont)
j.
Bearing
1. Install.
retainers
(40),
2. Tighten screws to
screws
7-9 lb-ft
(38), and
(9.5-12.2 Nm)
(39)
k.
1. Reverse the posi-
(52)
tion of the blower
housing on the two
wood blocks.
2. Lubricate one of the
roller bearings with
light engine oil.
Start the bearing,
numbered end up,
straight on one of
the rotor shafts.
3. Place installer
J6270-4 on top of
the bearing and tap
the bearing straight
on the shaft and into
the front end plate
as shown.
4. Install the second
roller bearing on the
remaining rotor shaft
in the same manner.
l.
Bearing
1. Install.
retainers
(43),
2. Tighten screws to
screws
7-9 lb-ft
(41), and
(9.5-12.2 Nm)
(42)
5-574
|
||
|
||
