| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-10
5-65.2 DISCONNECT CLUTCH-ANCHOR WINCH-MAINTENANCE INSTRUCTIONS
(Continued)
LOCATION
ITEM
ACTION
REMARKS
INSPECTION (Cont)
j.
Dis-
Inspect the disc assem-
assembly
bly for worn, loose, or
(23)
oil-soaked facings.
Check the assembly for
distortion or dished
condition and for
excessive wear at the
splines in the hub.
If the inspection
reveals it is practical
to reface the disc
assembly the correct
facing thickness is
5/32 inch. Do not
use a distorted disc
assembly. It is very
important to use only
the genuine original
equipment facings and
to set the rivets prop-
erly-see below.
Check the disc assembly
for runout. The disc
should be true to
within .015 inch at a
point midway between the
bore and the outside
diameter of the facing.
5-834
|
||
|
||
