5-65.2 DISCONNECT CLUTCH-ANCHOR WINCH-MAINTENANCE INSTRUCTIONS
2. Check clearances between the heads of the driving pins and the driving slots in the
mating intermediate plate by placing the intermediate plate over the pins, making
certain the plate fits freely before the clutch is assembled tothe engine. If
excessive clearance between the slots of the intermediate plate and the driving
pins exists, new parts should be installed.
3. Try the clutch in the engine flywheel before installing driven discs and intermediate
plate to make certain clutch pilot diameter is a free fit in the bore of the flywheel.
plate, be certain
its rotation will
be in the direc-
tion, of the arrows
appearing on one
side of the plate
near the bore.