| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-10
5-66. TORQUE CONVERTER-ANCHOR WINCH-MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY
10. Torque
NOTE
converter
seal
In the following procedure both torque
kit
converter seals will be rebuilt with
(basic
new parts from seal kits.
group)
a. Shaft seals
1. Install oil seal in
(68 and
its bore on the
103), and
bearing side of the
fluid seal
seal carrier.
carriers
(66 and
2. The lip of the seal
101)
will face away from
the carrier.
3. Lay seal carrier on
a clean surface,
shaft seal side down.
b. Garter seal
1. Place garter spring
springs (63
inside of rubber
and 98),
element.
and rubber
elements
2. Install rubber
(64 and
element in its bore
99)
in seal carrier (66
and 101) with garter
spring side up.
3. Lubricate with clean
oil.
c.
Retaining
Install shoulder side
washer (62
down in the mating
and 97)
bore of the rubber
element..
5-880
|
||
|
||
