| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-11
5-70.
GOVERNOR - MAINTENANCE INSTRUCTIONS (Continued).
(Continued).
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
e.
Setscrew
Install in spring lever
Make sure the
(78)
(79).
point of the
setscrew is
seated in the
flat on the
shaft (80).
f.
Bearing
1.
Lubricate with grease.
Use Shell
(81)
Alvania #2
grease or
equivalent.
2.
Place bearing numbered
end up, over the pro-
truding end of shaft
and start it straight
into bore of housing.
3.
Support the spring
housing, bearings and
installer on a short
sleeve on the bed of
an arbor press. Then
press the bearing in
the housing until the
shoulder on the
installer contacts
the housing.
5-970
|
||
|
||
