| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-11
5-71. .BLOWER - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL-DISASSEMBLY (Cont)
3. Place the long end
Use tool
of the oil seal
J6270-3.
remover and instal-
ler down through the
oil seal and into
the bearing, with
the opposite end of
remover under the,
ram of the press.
Then, press bearing
and oil seal out of
the end plate.
4. Remove the remaining
bearings and oil
seals from end plates
in the same manner.
o. Dowel pins Remove.
If necessary.
(57)
5-987
TM 55-1905-219-14-11
|
||
|
||
