| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-11
5-72. FUEL INJECTOR - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL - DISASSEMBLY (Cont)
d. Injector
1. Loosen.
Use tool
valve
J4983-01.
Nut
2. Lift injector nut
(8)
straight up. Be
careful not to dis-
lodge the spray tip
and valve parts.
e. Spray
1. Remove the spray tip
tip
and valve parts from
(9)
the bushing and place
and
them in a clean recep-
valve
tacle until ready for
parts
assembly.
2. When an injector has
Use tool
been in use for some
J1291-02.
time, the spray tip,
even though clean on
the outside, may not
be pushed readily
from the nut with the
fingers. In this
event, support the
nut on a wood block
and drive the tip
down thru the nut.
5-1018
|
||
|
||
